parameter:
SPECIFICATION
| First layer line pull（lbs/kg） | 12000/5443 |
| First layer line speed(fpm/mpm) | 6.5/2 |
| Working pressure diff.（psi/MPa） | 1740/12 |
| Oil flow supply（l/min） | 60 |
| Gear ratio | 60:01:00 |
| Wire rope dia.（inch/mm） | Φ3/8″/Φ9.2 |
| Layer | 4 |
| Wire rope capacity（ft/m） | 95’/29 |
| Valve model | N/A |
| Net weight(without wire rope)（lbs/kg） | 135.6/61.5 |
PERFORMANCE
| Layer of cable | Rated line pull per layer | Line speed | Wire rope capacity per layer | |||
| lbs | kg | fpm | mpm | ft | m | |
| 1 | 12000 | 5443 | 6.5 | 2 | 20’ | 6 |
| 2 | 10122 | 4591 | 7.2 | 2.2 | 40’ | 12 |
| 3 | 8753 | 3970 | 7.8 | 2.4 | 70’ | 21 |
| 4 | 7710 | 3497 | 8.5 | 2.6 | 95’ | 29 |
VALVE OPTIONS
| Valve | NF-90 P2 S1-002 |
| NF-90 P2 Y1 S1-002 | |
| NF-90 P2 Y2 S1-002 | |
| Remark | Please see page 22 valve block selection table |
NOTE:
1. Recommended oil flow supply range is 30-60 l/min.
2. Winch must be used in Independent oil supply system which with relief valve.
3. Relief valve can be selected from the valve block selection table as optional.
4. Wire rope out direction please see above figure, DO NOT change direction without permission. Please ask when choosing winch type if need to change wire rope out direction.
SPECIFICATIONS:
WARNING:
1. The winch will never be used for hoisting people or hoisting objects above people.
2. Do not use clutch under load.
3. Do not equip winch into oil supply system which without relief valve.
Features:
